You will need to locate your nbn connection point, which is a white box that is mounted on a wall somewhere inside your home. This is the point where you will need ot plug your newmodem in and will look like the illustration below.
Once you’ve found your nbn connection point, to connect your new Moose nbn service:
- Simply reply to the SMS with the unique 6-digit activation code.
- Head to our website and hit the Activate button on the front page
- Call us on 1300 566 673
The activation process will take1-4 hours to complete as long as you request it between 9-5 Mon-Sat, otherwise the activation process will begin at 9AM on the following business day. You’ll receive a confirmation SMS and email once the process is completed.
You will need to plug your Moose Mobile modem into your nbn connection box to connect your Internet service.
To connect your new Moose modem to your nbn box, remove the cover on the box to access the ports on the bottom. Press the two clips on either side and lift the cover at an angle (as shown below) to remove it.
If your nbn connection box is correctly plugged into the power socket you should notice the POWER and OPTICAL lights turn solid green. If you have an optional battery backup unit installed, the ALARM button may also be green. If the optical light on your nbn connection box remains red or is off, please contact our support team on 1300 566 673 for further troubleshooting.
Now, take your Moose Mobile modem’s power supply cable and use it to connect your modem’s power port to an electrical outlet. Switch the powerpoint on. Take the included yellow ethernet cable that came with your Moose Mobile modem and plug one end into the yellow port marked UNI-D 1 on the bottom of the nbn connection box.
Plug the other end of this yellow ethernet cable into the blue WAN port on the back of your Moose Mobile modem.
You’ll know your internet is ready to use when the “Internet” light on the front of your modem is flashing green.
Your Moose Mobile modem will begin broadcasting Wi-Fi as soon as it is plugged into power, turned on and has finished booting up. You can then connect your devices such as computers, phones, and tablets via Wi-Fi.
Your modem will broadcast a 2.4GHz network and a 5GHz network. Moose Mobile recommends connecting to the standard 2.4GHz option for a more reliable and consistent Wi-Fi connection.
Pictured: Moose Mobile TP-Link Archer VR1600v modem
The modem’s Wi-Fi name and password are printed on the back of the modem and respectively labeled as:
- Wireless Password/PIN
If you have a computer nearby that you would like to connect via Ethernet, take another Ethernet cable and plug one end into any one of the modem’s yellow Ethernet ports (labelled LAN).
If you have issues connecting your Moose Mobile supplied modem, please contact us on 1300 566 673 for further troubleshooting.