BYO Modem - Telstra Smart Modem (DJA0230) (HFC, FTTP, FTTC, & FW)

STEP 1 - Connect to your modem via Wi-Fi or Ethernet

Ensure that Wi-Fi is enabled on the device you are using to access your modem (e.g. computer/laptop/smartphone/tablet). If you are using a smartphone or tablet, you should turn off your mobile data connectivity or any hotspot connection during this process.

Connect to the Wi-Fi/Wireless network of the Telstra Smart Modem Gen 1 (DJA0230) on your computer/laptop/smartphone/tablet. To connect to the Wi-Fi network of the Smart Modem, locate the Wi-Fi network name being broadcast by the modem from your device (e.g. computer/laptop), select this network, then enter the password for this network when prompted.

If you are unsure of the Wi-Fi password, this will be printed on the back/bottom of the Smart Modem.

PLEASE NOTE: YOU DO NOT NEED TO HAVE A WORKING INTERNET CONNECTION TO CONNECT TO THE WI-FI OF THE SMART MODEM OR ACCESS THE MODEM GATEWAY PAGE.

Alternatively, you can plug in an RJ-45 Ethernet cable from your computer or laptop to one of the four (4) yellow LAN ports on the back of the Smart Modem.

STEP 2 - Log in to your modem

Open your web browser (e.g. Google Chrome/Internet Explorer/Mozilla Firefox/Microsoft Edge), enter 10.0.0.138 into the address bar and press Enter.

If this doesn’t work, you can also try and enter the following: 192.168.1.1 or 192.168.0.1

If successful, a login box or window should appear asking for a username and password. Enter admin in the Username field;

Enter Telstra in the Password field. If this doesn’t work, the password will be printed on the bottom of the modem. Enter this password.

STEP 3 - Enter the Moose Mobile settings into your modem

Once you have logged in, you will have several options listed across the top of the page. Click ‘Broadband‘

Under the heading PPP Settings, enter your Moose Mobile service username in the Username field. This will be in the following format: [USERNAME]@moosemobile.com.au

Under the heading PPP Settings, enter your Moose Mobile service password in the Password field. This will be in the following format: moose[YEAR OF BIRTH]

Your Moose Mobile service username would have been emailed to you during the order process – this is NOT the same password as your Moose Mobile customer portal login.

Click the Apply button.

STEP 4 - Plug your modem into the nbn™ device

You now need to plug your Telstra Smart Modem into your nbn™ device using an RJ-45 Ethernet cable.

One end of the Ethernet cable needs to be plugged into the red port labelled WAN on the back of the modem and the other end into the active port on your nbn™ device – this will either be a numbered UNI-D port (such as UNI-D 1, UNI-D 2 etc.) or a GATEWAY port.

Try UNI-D Port 1 first, and then work your way through them if the first port doesn’t successfully connect you to the internet.

You will need to wait for the Online light on the top of your modem to turn solid. This may take up to five (5) minutes.

If the Online light on your Telstra Smart Modem does not turn solid after 5 minutes, please contact us on 1300 566 673 for further troubleshooting.