Fixed Wireless Setup Guide

STEP 1

You will need to locate your NBN connection point, which is a white box that is mounted on a wall somewhere inside your home. This is the point where you will need to plug your new modem in and will look like the illustration below.

IMPORTANT:

Please make sure you have an Ethernet Cable at hand. These cables are often confused with a DSL/Phone Cable which is smaller but looks similar. Ethernet cables will often come in blue, yellow, or grey and DSL/Phone cables are often white or grey.

Once you’ve found your NBN connection point, to connect your new Moose NBN service:

• Simply reply to the SMS with the unique 6-digit activation code we will send you when we expect you will have received your modem

OR

• Head to our website and hit the Activate button on the front page and follow the steps for an NBN activation

OR

• Call us on 1300 566 673 and request to have your NBN activated

The activation process will take 2-8 hours to complete as long as you request it between 9-5 Mon-Fri, otherwise the activation process will begin at 11AM on the following business day. You’ll receive a confirmation SMS and email once the process is completed.

STEP 2

You will need to plug your modem into your NBN connection box to connect your internet service.

First, ensure that the included power cable from the nbn connection box is plugged in and secure. Plug the other end of the power cable into a power wall outlet in your home and switch the powerpoint on.

After a few minutes, you should notice the POWER, STATUS and ODU lights on the front of the box turn solid green. You should also then have at least one SIGNAL STRENGTH light on (this will usually be flashing).

If the STATUS or ODU lights on nbn connection box remain red or are off, please contact our support team on 1300 566 673 for further troubleshooting.

Now, take your Moose Mobile modem’s power supply cable and use it to connect your modem’s power port to an electrical outlet. Switch the powerpoint on. Take the included yellow ethernet cable that came with your Moose Mobile modem and plug one end into the yellow port marked UNI-D 1 on the back of the nbn connection box.

Plug the other end of this yellow ethernet cable into the furthermost right yellow ethernet port labeled WAN on the back of your Moose Mobile modem.

You’ll know your internet is ready to use when the “Internet” light on the front of your modem is flashing green.

Your Moose Mobile modem will begin broadcasting Wi-Fi as soon as it is plugged into power, turned on and has finished booting up. You can then connect your devices such as computers, phones, and tablets via Wi-Fi.

Your modem will broadcast a 2.4GHz network and a 5GHz network. Moose Mobile recommends connecting to the standard 2.4GHz option for a more reliable and consistent Wi-Fi connection.

Pictured: Moose Mobile TP-Link VX230v modem

The modem’s Wi-Fi name and password are printed on the back of the modem and respectively labelled as:

• SSID
• Wireless Password / Pin

(Below is for illustration purposes only, your Wi-Fi password and username will be different and will be on the back of the modem we send you)

If you run into any issues with your supplied Moose Mobile modem, please call us on 1300 566 673 for assistance. Alternatively, you can attempt to follow the steps outlined in the article linked below to do a modem reset and reapply your PPPoE settings manually.

Manual Setup Guide for VX230v